Stock comes from our suppliers, we'll confirm yours after you order
Product images Are for Illustrative Purposes Only
Honesty And Satisfaction Guaranteed
Smooth matte finish that hides layer lines | Clean support removal with no sanding required | Compatible with 0.2 mm nozzles and above | Pre-configured factory parameters for consistent results | 1 kg spool of FDM PLA filament
The Anycubic PLA Matte filament in Nardo Grey is designed for FDM 3D printing enthusiasts who want display-quality results without extensive post-processing. Its fine, uniform matte texture naturally minimises the appearance of layer lines, making it well suited to decorative parts, artistic sculptures, anime figurines, and fandom pieces. Supports peel away cleanly, leaving a smooth contact surface that needs no sanding. Pre-configured with factory-tuned printing parameters, it works at nozzle temperatures between 190 °C and 230 °C, a heated bed of 60–65 °C, and printing speeds from 50 to 250 mm/s — so you spend less time calibrating and more time creating. The 1 kg spool covers a broad range of projects, and the filament is compatible with any 1.75 mm FDM printer using a 0.2 mm or larger nozzle.
Features
Matte texture minimises visible layer lines for cleaner, more realistic prints
Supports remove cleanly and effortlessly — no sanding or post-processing needed
Pre-configured factory parameters for consistent, high-quality results straight away
Compatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or above
Intelligent identification chip supported for automatic parameter recognition on compatible Anycubic printers
Reusable filament spool with threaded locking system to reduce entanglement and feeding errors
Compliant with RoHS, REACH, and SDS certifications
Specifications
Colour: Matte Nardo Grey (#898B8E)
Dry Out Before Use: Recommended
Drying Condition: 55-65℃, 6-8h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.2 mm or above
Printing Temperature: 190-230 ℃
Heated Bed Temperature: 60-65 ℃
Recommended Printing Speed: 50-250 mm/s
Cooling Time: 8 s
Maximum Volume Speed (Flow Rate): 12 mm³/s
Density: 1.25 g/cm³
Melt Index: 8±3 g/10 min (190℃/2.16kg)
Melting Point Temperature: 163 ℃
Vicat Softening Temperature: 57 ℃
Heat Deflection Temperature (0.45MPa): 54 ℃
Young's Modulus: 2600±150 MPa
Tensile Strength: 38±2 MPa
Elongation at Break: 13±4%
Bending Modulus: 3200±100 MPa
Bending Strength: 67±2 MPa
lzod lmpact Strength (X-Y): 19±1 kJ/m²
Tensile Strength (Z): 12±2 MPa
Filament Type: Aesthetic filaments
Recommend to Print: Decorative parts, fandom, artworks, anime figurines
