Stock comes from our suppliers, we'll confirm yours after you order
Product images Are for Illustrative Purposes Only
Honesty And Satisfaction Guaranteed
Fine matte finish that hides layer lines | Clean support removal with no sanding | Pre-configured printing parameters | Compatible with 0.2 mm nozzles and above | 1 kg spool
The Anycubic PLA Matte Filament is designed for makers who want their prints to look as good as they perform. Its fine, uniform matte texture naturally conceals layer lines, making it ideal for decorative parts, display models, figurines, and artistic sculptures where surface quality matters. Supports peel away cleanly without sanding or post-processing, saving you time straight off the build plate. The filament ships pre-configured with factory-tuned parameters, so you can load it and print with confidence — no tedious calibration required. Compatible with any 1.75 mm FDM printer using a 0.2 mm nozzle or larger, it runs at a printing temperature of 190–230 °C and a heated bed temperature of 60–65 °C, with recommended speeds of 50–250 mm/s. A reliable, polished choice for creative prints that deserve a professional finish.
Features
Fine, uniform matte texture minimises visible layer lines for a polished surface finish
Supports remove cleanly and effortlessly, leaving a smooth contact area with no sanding needed
Pre-configured with factory-tuned parameters for consistent results straight out of the box
Compatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or larger
Intelligent identification chip supported for seamless ACE Pro integration
Reusable spool with threaded locking system reduces entanglement and feeding errors
Compliant with RoHS, REACH, and MSDS/SDS certifications
Specifications
Colour: Matte Black (#484A49)
Dry Out Before Use: Recommended
Drying Condition: 55-65℃, 6-8h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.2 mm or above
Printing Temperature: 190-230 ℃
Heated Bed Temperature: 60-65 ℃
Recommended Printing Speed: 50-250 mm/s
Cooling Time: 8 s
Maximum Volume Speed (Flow Rate): 12 mm³/s
Density: 1.25 g/cm³
Melt Index: 8±3 g/10 min (190℃/2.16kg)
Melting Point Temperature: 163 ℃
Vicat Softening Temperature: 57 ℃
Heat Deflection Temperature (0.45MPa): 54 ℃
Young's Modulus: 2600±150 MPa
Tensile Strength: 38±2 MPa
Elongation at Break: 13±4%
Bending Modulus: 3200±100 MPa
Bending Strength: 67±2 MPa
lzod lmpact Strength (X-Y): 19±1 kJ/m²
Tensile Strength (Z): 12±2 MPa
Filament Type: Aesthetic filaments
Recommend to Print: Decorative parts, fandom, artworks, anime figurines
