Single Point Sling QD push button bungee FDE

Overview

The Old Camo Single Point Sling in Flat Dark Earth is a bungee-cushioned one-point rifle sling built around a quick-detach (QD) push-button swivel, aimed at AR-pattern rifles, carbines and tactical shotguns that carry a QD sling socket or receiver end plate.

A single-point sling lets the rifle hang centrally in front of the body rather than across one shoulder, so the shooter can swing the muzzle left or right, transition to a sidearm, or drop the long gun on its sling without it swinging wide. The bungee section in the drop is the detail that separates a good single-point sling from a cheap one: it soaks up the bounce of the rifle against the chest during movement, instead of letting a dead weight of nylon webbing slap into the shooter with every step.

The FDE tan colourway on this example matches the desert and bushveld-pattern furniture increasingly common on hunting and range rifles in South Africa, and pairs with tan-finished QD swivels, mounts and stocks rather than standing out against them the way black webbing does.

Key Features

• A push-button QD swivel at the working end clips straight into any standard QD sling socket, so the sling comes off the rifle in one motion when it needs to be slung over a pack or stored, instead of being threaded off through a loop.
• The elasticated bungee section in the lower leg of the sling stretches under load and pulls the rifle back against the body when it is released, cutting down on muzzle bounce and chest slap during a patrol walk or a long stalk.
• Two side-release buckles on the upper Y-strap allow the sling to be unclipped from the neck loop in an emergency without unclipping it from the rifle, which matters if the sling ever snags on gear or a vehicle door.
• A metal triangle ring joins the upper two-point yoke to the single lower leg, distributing the load across both shoulders even though the rifle itself is only attached at one point.
• Ladder-lock adjusters on both straps of the yoke let the loop be shortened or lengthened independently, so the sling can be set up over body armour or a jacket without needing to be refitted for bare shoulders.
• A second HK-style steel spring hook at the very end of the sling gives a fixed-loop attachment option for rifles or shotguns that use an HK hook receiver rather than a QD socket.

Technical Specifications

Materials and Construction

The body of the sling is stitched from heavy nylon webbing, box-stitched at every load point where the yoke, the triangle ring and the bungee leg meet, which is where a cheaper sling tends to fail first. The bungee itself is an elastic shock cord sheathed inside a nylon sleeve rather than left exposed, so the rubber core is not the part taking abrasion against a plate carrier or pack. Hardware is matte-finished steel and reinforced polymer: the QD push-button swivel and the HK hook are both metal for strength, while the ladder-lock adjusters and side-release buckles are moulded polymer to keep weight down.

Fit and Compatibility

The QD end fits any rifle, carbine or shotgun with a standard QD sling socket, which covers most AR-15/M4-pattern rifles with a QD receiver end plate or QD-cut stock, along with pump shotguns drilled for a QD cup. The HK-style spring hook on the same sling gives a second mounting option for rifles fitted with an HK-pattern sling loop or a standard sling swivel stud, so the sling is not locked to one attachment standard. It is not a two-point sling and does not include a front mounting point for the muzzle end, so it will not convert a two-point-only rifle setup without an additional QD mount fitted to the fore-end or hand guard.

Sizing and Adjustment

Both straps of the neck yoke run through ladder-lock adjusters, so the loop can be shortened for a snug fit over a t-shirt or lengthened to sit over body armour or a heavy jacket. The bungee leg does the fine adjustment during use, stretching to let the rifle come up to the shoulder and pulling it back to a low ready position once released, so there is no need to constantly re-tighten the sling as the shooter moves between positions.

Care and Maintenance

Nylon webbing and elastic shock cord both cope well with dust, rain and typical range or bushveld use, but the bungee core does lose some elasticity over years of hard UV exposure, as with any rubber-cored product. A rinse in cold water and an air dry away from direct sun after a muddy or salty outing keeps the stitching and the hardware corrosion-free, and an occasional check of the stitching at the triangle ring and the QD swivel is worth doing before a hunt or a course, since that is where the sling carries the rifle's full weight.

Who It's For

This sling suits shooters who want the rifle to stay centred and close to the body rather than slung over one shoulder: three-gun and tactical carbine course shooters, PSD and security operators moving between long gun and pistol, and hunters who want both hands free at short notice without letting the rifle swing loose. Shooters who spend long days walking with the rifle slung and prefer it riding across one shoulder rather than the chest are better served by a padded two-point sling instead.

FAQ

• Will this fit my rifle if it does not have a QD socket? Yes, the sling includes an HK-style steel spring hook alongside the QD swivel, so it can hook onto a standard sling loop or swivel stud instead.
• Does the bungee section wear out? The elastic core will soften gradually with years of use and sun exposure, the same as any bungee cord product, but the nylon sleeve around it protects it from abrasion damage in normal use.
• Can I use this as a two-point sling? No, it is built as a single-point sling with one attachment end; a separate front mounting point and a different sling are needed for a two-point carry.
• Is the FDE colour an exact match to my rifle's Cerakote or furniture? FDE webbing varies slightly between manufacturers and dye lots, so treat it as a close tonal match to tan/FDE furniture rather than a guaranteed exact colour match.