Bryco Jimenez 380 Cal 9mm Short Magazine 6 Round 2nd Hand

Overview

This is a factory-pattern 6-round magazine for the Bryco Model 38 and its successor, the Jimenez Arms JA-380, chambered in.380 ACP (also sold in Europe as 9mm Kort or 9mm Short). Bryco Arms built its name in the 1990s on cheap, compact pocket pistols aimed at the budget end of the US concealed-carry market, and the Model 38 was the.380 ACP flagship of that range before Paul Jimenez bought the company's assets in 2004 and carried the same tooling forward as the JA-380. The magazine on sale here is a genuine period part, not a reproduction, and it is sold second hand.

What sets this magazine apart from generic aftermarket clips is the flat, single-stack blued-steel body with an integral finger-rest baseplate, which is exactly how Bryco and Jimenez shipped the gun from the factory. Buyers repeat one fact about this magazine more than any other: it is a straight factory-fit replacement, not a universal clone, so it drops into the pistol's magazine well and locks against the original catch without filing or fitting.

Because Bryco Arms folded in 2003 and Jimenez Arms itself stopped production of the JA-380 around 2020, factory magazines like this one are no longer manufactured new. Anyone still shooting one of these small-frame pistols relies on the used market for spares, which is where this magazine sits.

Key Features

• Six-round single-stack capacity matches the original factory specification for the Model 38 and JA-380, so it restores the pistol to its designed capacity rather than under- or over-filling the magazine well.
• Blued steel body resists the everyday knocks of range use and holster carry better than a painted or plated finish, though surface wear should be expected on a part this age.
• Integral extended finger-rest baseplate gives a third finger a purchase point on an otherwise very short pistol grip, which noticeably steadies the hold during firing.
• Witness holes down the spine of the magazine body let the shooter do a quick visual round count without dropping the magazine to check.
• Flat-follower steel construction is the same pattern used across the wider Bryco/Jennings/Jimenez small-caliber pistol family, so it is a known, well-documented spare rather than an unknown clone part.

Technical Specifications

Materials & Construction

The body is stamped from a single sheet of carbon steel, folded and welded down the back seam, then blued for corrosion resistance the same way the pistol's own slide and barrel are finished. The baseplate is a separate steel pressing that locks over the folded lower lip of the body, which is where flat magazines of this era most commonly show play or looseness after years of use. The follower and spring are steel as well; there is no polymer anywhere in the magazine, which is part of why surviving examples from the 1990s and 2000s still function despite their age.

Fit & Compatibility

This magazine is built to the Bryco Model 38 / Jimenez JA-380 pattern and is a direct fit for both, since Jimenez continued using Bryco's tooling after the 2004 buyout. It is not interchangeable with the Jimenez JAT-380, which uses a different, longer 7-round magazine with its own finger rest profile. Some parts suppliers list this same flat-body magazine as also fitting the.32 ACP Bryco J-32 / Jimenez JA-32 frame, since the two pistols share an identical magazine well, though the feed lips are cut for the shorter, narrower.380 ACP case and should not be forced onto.32 ACP ammunition.

Care & Maintenance

Wipe the body down with a lightly oiled cloth after range use to keep the blued finish from spotting, and avoid submerging the magazine in solvent, which can wash lubricant out of the follower channel and stiffen its travel. Every so often strip the baseplate off, pull the spring and follower clear, and check the spring for kinks or permanent set; a tired spring is the most common reason an old magazine like this starts short-stroking or failing to lock the slide back on empty. Store it loaded to five rounds rather than six if it will sit for long periods, which takes ongoing stress off the spring.

Brand Background

Bryco Arms operated out of Costa Mesa, California, through the 1990s as one of the so-called 'Ring of Fire' manufacturers of low-cost pocket pistols. The company went bankrupt in 2003, and Paul Jimenez, the plant's former foreman, bought the remaining tooling and relaunched the same designs as Jimenez Arms. The JA-380 continued the Bryco Model 38 until Jimenez itself filed for bankruptcy in 2020.

Who It's For

This magazine suits an owner who already has a working Bryco Model 38 or Jimenez JA-380 and needs a spare or replacement, rather than someone shopping for a magazine to fit a different pistol. Because new-production spares no longer exist for this platform, second-hand factory magazines like this one are the practical route to keeping an older gun running at its designed six-round capacity.

FAQ

Will this fit my Jimenez JAT-380? No, the JAT-380 uses a longer 7-round magazine with a different baseplate profile.

Can I load.32 ACP into this magazine? No, the feed lips are cut for.380 ACP / 9mm Kort and will not present a narrower.32 ACP round correctly.

Is this a new-manufacture part? No, both Bryco and Jimenez have ceased production, so this is a genuine used factory magazine, sold as-is in the condition photographed.

Does it come with the pistol? No, this listing is for the magazine only.